Professional No Scratch Tire Valve Stem Puller Installer Remover with Rubber Leverage Block
Professional no scratch valve stem puller for installing snap in tubeless valve stems.
This is the best valve stem puller I have found and the one we use exclusively in our shop. This puller has a rubber leverage block made on it. The rubber block contacts the wheel and will not scratch or chip the paint or chrome on the wheel lip. The block also gives you the extra leverage to pull out the old stem. It is for use on all types of rubber snap in valve stems.
No customer reviews for the moment.
15 other products in the same category:
6 Gallon bucket Magnum Sealitup Professional Grade Slow Moving Tire Puncture Sealant
Cable valve stem fishing tool for assembling tube type tires.
Lever lock tire and tube deflator or aspirator for deflating tubes and tires flat.
Pack of TWO 4-way standard bore tire or tube stem valve tools
8 lb Pail Rema Tip Top Tire Mounting Compound
Low speed inline air tire/tube buffer with Jacobs style chuck and 24 grit buffing stone.
Application Pump fits 5 or 6 Gallon buckets of Magnum Sealitup Tire Puncture Sealant THIS IS THE PUMP ONLY SEALANT IS SOLD SEPARATELY
3 piece air-water hose adapter for liquid filling tube or tubeless tires for weight or ballast. Adapter attaches to a garden hose, it has common female garden hose threads. Screws directly on TR218 modern tractor tubes or TR618 tubeless tractor stems. Has an air bleed for releasing built up air pressure while filling without disconnecting the hose. Also...
9" USA made professional grade small tire iron.
Double ended valve core tool for both standard and large bore valve cores.
25 lb Pail Heavy Tire Mounting Compound
20 pack of B6 rim hole bushings. Slips over the TR13 tube stem to adapt it up to the 5/8" wheel stem hole.