Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
Qty 1 = 4 stems. Price is for a set of 4 valve stems with special stepped screws only, you reuse your sensors. These are a special snap in TPMS stem used on SOME BUT NOT ALL Hyundai, Kia, GM, and Ford vehicles. The end where the TPMS sensor attaches is shaped like the letter D it has 3 flat sides and one rounded side, see the pic. The screw is also a special stepped screw with a shoulder that it bottoms out on. Confirm this is what you need before purchasing.
No customer reviews for the moment.
Price is for a lot of 4 valve caps. Long skirt plastic valve caps made to fully cover the brass on the rubber snap in tpms valve stems.
TWENTY TR573 tubeless truck tire stems for steel 22.5" and 24.5" Budd and Dayton wheels.
TEN TR573 tubeless truck tire stems for steel 22.5" and 24.5" Budd and Dayton wheels.
Two low profile brass tubeless tire valve stems for ag and farm implement. Includes grommet for both .453" and .625" stem hole.
FOUR TR413CS chrome sleeved tubeless snap in valve stems 1.25" long for .453" stem hole.
Bag of 100 TR415 tubeless tire snap in valve stems 1.25" long for the large .625" stem hole.
20 pack of B6 rim hole bushings. Slips over the TR13 tube stem to adapt it up to the 5/8" wheel stem hole.
Package of 100 Hi Temperature Red Standard Tire Valve Cores
TEN TR545 tubeless truck tire stems for new aluminum 22.5" and 24.5" wheels.
Bag of 20 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
Bag of 4 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
Bag of 4 TR415 tubeless tire snap in valve stems 1.25" long for the large .625" stem hole.
Package of 100 black plastic valve caps
TWO Large bore OTR wheel spuds.
Package of 100 green plastic valve caps with seal (indicates nitrogen filled)
TWO Large bore hi-temp tire valve cores.
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
