TEN TR509 tubeless truck tire stems for older aluminum 22.5" and 24.5" wheels.
TWENTY TR414 Tubeless Tire Valve Stems 1.5" Long for .453" stem hole
Bag of 20 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 20 TR414 tubeless snap in stems.These fit the standard .453" valve stem hole and are 1.5" long on the outside of the rim. These are 1/4" longer than the common TR413 and used when just a little more length is needed such as on wheels where the stem is recessed down in a hole on an alloy wheel. Not for use on TPMS applications or applications running over 60 psi operating pressure.
No customer reviews for the moment.
16 other products in the same category:
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
TWO TR618 tubeless tractor tire fast fill air/liquid valve stems for .625" stem hole.
TWENTY TR509 tubeless truck tire stems for older aluminum 22.5 and 24.5" wheels.
Bag of 20 TR415 tubeless tire snap in valve stems 1.25" long for the large .625" stem hole.
TWO Large bore 3" bent tire valves with spuds.
Bag of 100 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Price is for a lot of 4 valve caps. Long skirt plastic valve caps made to fully cover the brass on the rubber snap in tpms valve stems.
Bag of 4 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
TR218 replacement stem assembly for tractor tire and construction tubes. Includes base, plastic rim nut, and core housing with cap. FOR PROFESSIONAL INSTALLATION ONLY.
Bag of 4 TR802HP tubeless long high pressure snap in stems for .625" stem hole.
Set of 5 Dill 627 special domed tip plastic valve caps
Two OLD STYLE CH1 Antique Tractor Tube core housings. This style is obsolete and not used on any tube we sell, only on antique tractor tubes.
Bag of 4 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
TWENTY TR573 tubeless truck tire stems for steel 22.5" and 24.5" Budd and Dayton wheels.
Set of FOUR rubber snap In TPMS valve stems. Common double D sensor post end with two flat sides and two convex rounded sides.