TWO Large bore 3" bent tire valves with spuds.
Two LARGE BORE J650R bent tire valves with spuds. The J650R has an 80 degree bend and is approx 3" long. It has a large bore valve core and screws into a wheel spud. The spud is the part that bolts in the wheel. The SP2 or VS977 spud is the common spud that fits the 13/16" wheel hole. Large bore valves are used on some OTR or off the road industrial and mining tires. They can be found on dirt scrapers, bucket loaders, road graders, large agricultural flotation tires, mining equipment, etc.
No customer reviews for the moment.
Bag of 20 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
Bag of 20 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 4 TR412 tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
TWO TR621A long bent tubeless tractor tire fast fill air/liquid valve stems for .625" stem hole.
TWO Large bore tire valve caps with core remover on top.
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
Bag of 20 TR801HP tubeless high pressure snap in stems for .625" stem hole.
Bag of 20 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
TWO Large bore hi-temp tire valve cores.
Bag of 4 TR415 tubeless tire snap in valve stems 1.25" long for the large .625" stem hole.
20 pack of B6 rim hole bushings. Slips over the TR13 tube stem to adapt it up to the 5/8" wheel stem hole.
Bag of 20 TR412 tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
Bag of 4 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Set of 5 Dill 627 special domed tip plastic valve caps
Bag of 100 TR413CS chrome sleeved tubeless snap in valve stems 1.25" long for .453" stem hole.
Pack of TEN plastic rim nuts for TR218 tube stems
TWO Large bore 3" bent tire valves with spuds.
