FOUR VS-20 Dill Snap In TPMS Valve Stems D shaped end 3 flat sides stepped screw
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
TWENTY TR545 tubeless truck tire stems for new aluminum 22.5" and 24.5" wheels.
TWENTY TR545 tubeless truck tire valve stems. These fit the new style Alcoa aluminum commercial truck and semi wheels both 22.5" and 24.5" They have a 60 degree bend and use the nut that goes on the outside of the wheel. They use an o-ring seal recessed in the stem to seal.
No customer reviews for the moment.
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
TWO TR621A long bent tubeless tractor tire fast fill air/liquid valve stems for .625" stem hole.
20 pack of B6 rim hole bushings. Slips over the TR13 tube stem to adapt it up to the 5/8" wheel stem hole.
TEN TR573 tubeless truck tire stems for steel 22.5" and 24.5" Budd and Dayton wheels.
Set of FOUR Dill VS-65 Rubber Snap In TPMS Stems. Square post end for Chrysler, Dodge, Jeep, Ram. Replaces OE 68206635AB
Bag of 4 TR418 tubeless tire snap in valve stems 2" long for .453" stem hole.
Two OLD STYLE CH1 Antique Tractor Tube core housings. This style is obsolete and not used on any tube we sell, only on antique tractor tubes.
Bag of 100 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 4 TR802HP tubeless long high pressure snap in stems for .625" stem hole.
TWENTY TR509 tubeless truck tire stems for older aluminum 22.5 and 24.5" wheels.
TEN TR509 tubeless truck tire stems for older aluminum 22.5" and 24.5" wheels.
Bag of 4 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
TWENTY TR573 tubeless truck tire stems for steel 22.5" and 24.5" Budd and Dayton wheels.
Bag of 20 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
Bag of 20 TR413CS chrome sleeved tubeless snap in valve stems 1.25" long for .453" stem hole.
Set of FOUR Dill VS-950 rubber snap In TPMS valve stems. Common double D sensor post end with two flat sides and two convex rounded sides.