Bag of 6 TR602HP tubeless high pressure snap in long stems for the standard .453" stem hole.
Bag of 6 TR602HP tubeless high pressure snap in stems.These are for the standard size .453" diameter stem hole and are 2" long on the outside of the wheel. High pressure stems are required for any applications running over 60 psi operating pressure. Some people will use this longer stem on duallie wheels to make it easier to get to the inside rears to inflate as well as applications where a longer stem is needed due to hubcaps.
No customer reviews for the moment.
TWO Large bore straight tire valves with spuds.
Set of FOUR Dill VS-950S chrome sleeved Rubber Snap In TPMS Stems. Common double D sensor post end with two flat sides and two convex rounded sides.
Lot of 100 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
Bag of 20 TR412CS chrome sleeved tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
Set of 5 Dill 627 special domed tip plastic valve caps
Two new replacement complete valve core housings and rim nuts for TR218 fast fill air/water tube stems
Bag of 20 TR602HP tubeless high pressure snap in long stems for the standard .453" stem hole.
Bag of 4 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 4 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
TWO Large bore 3" bent tire valves with spuds.
Bag of 20 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
Bag of 100 TR801HP tubeless high pressure snap in stems for .625" stem hole.
TWO Large bore to standard bore tire valve adaptors.
Bag of 4 TR412 tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
Bag of 100 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
Bag of 4 TR412CS chrome sleeved tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
Bag of 6 TR602HP tubeless high pressure snap in long stems for the standard .453" stem hole.
