Bag of 4 TR802HP tubeless long high pressure snap in stems for .625" stem hole.
FOUR TR412CS Chrome Sleeved Tubeless Tire Valve Stems short 7/8" long for .453" stem hole
Bag of 4 TR412CS chrome sleeved tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
Bag of 4 TR412CS chrome sleeved tubeless snap in stems.These fit the standard .453" valve stem hole and are 7/8" long on the outside of the rim. TR412 is the shortest rubber snap in stem. These are the stubby stems used on ATV rims, lawn mower rims, boat trailer wheels, etc. These will also fit passenger car wheels if you want a really short stem. These are used on wheels that don't require a longer stem for hubcaps. Not for use on TPMS applications or applications running over 60 psi operating pressure. To install you remove the sleeve and pull the stem in the wheel then reinstall the sleeve.
No customer reviews for the moment.
16 other products in the same category:
Bag of 4 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
Price is for a lot of 4 valve caps. Long skirt plastic valve caps made to fully cover the brass on the rubber snap in tpms valve stems.
20 pack of B6 rim hole bushings. Slips over the TR13 tube stem to adapt it up to the 5/8" wheel stem hole.
Bag of 4 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Set of FOUR Dill VS-20 Rubber Snap In TPMS Stems. D shaped end with 3 flat sides and stepped screw.
Set of FOUR Dill VS-950S chrome sleeved Rubber Snap In TPMS Stems. Common double D sensor post end with two flat sides and two convex rounded sides.
TWO Large bore OTR wheel spuds.
Two OLD STYLE CH1 Antique Tractor Tube core housings. This style is obsolete and not used on any tube we sell, only on antique tractor tubes.
Set of FOUR Dill VS-950 rubber snap In TPMS valve stems. Common double D sensor post end with two flat sides and two convex rounded sides.
TR218 replacement stem assembly for tractor tire and construction tubes. Includes base, plastic rim nut, and core housing with cap. FOR PROFESSIONAL INSTALLATION ONLY.
Bag of 100 TR801HP tubeless high pressure snap in stems for .625" stem hole.
TWO Large bore straight tire valves with spuds.
Package of 100 green plastic valve caps (indicates nitrogen filled)
FOUR TR413CS chrome sleeved tubeless snap in valve stems 1.25" long for .453" stem hole.
TWO Large bore hi-temp tire valve cores.