Bag of 4 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 4 TR414 tubeless snap in stems.These fit the standard .453" valve stem hole and are 1.5" long on the outside of the rim. These are 1/4" longer than the common TR413 and used when just a little more length is needed such as on wheels where the stem is recessed down in a hole on an alloy wheel. Not for use on TPMS applications or applications running over 60 psi operating pressure.
No customer reviews for the moment.
Bag of 20 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
Bag of 4 TR418 tubeless tire snap in valve stems 2" long for .453" stem hole.
Set of FOUR Dill VS-950 rubber snap In TPMS valve stems. Common double D sensor post end with two flat sides and two convex rounded sides.
Bag of 100 TR412 tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
TEN TR545 tubeless truck tire stems for new aluminum 22.5" and 24.5" wheels.
Bag of 20 TR418 tubeless tire snap in valve stems 2" long for .453" stem hole.
Bag of 4 TR802HP tubeless long high pressure snap in stems for .625" stem hole.
TWO TR618 tubeless tractor tire fast fill air/liquid valve stems for .625" stem hole.
Two OLD STYLE CH1 Antique Tractor Tube core housings. This style is obsolete and not used on any tube we sell, only on antique tractor tubes.
Bag of 4 TR412CS chrome sleeved tubeless tire snap in valve stems 7/8" long for .453" stem hole. This is the shortest snap in stem.
Bag of 4 TR413 tubeless tire snap in valve stems 1.25" long for .453" stem hole. This is the most common size.
Lot of 100 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
Bag of 20 TR600HP tubeless high pressure snap in stems for the standard .453" stem hole.
TWO Large bore 3" bent tire valves with spuds.
Set of 5 Dill 627 special domed tip plastic valve caps
Two new replacement complete valve core housings and rim nuts for TR218 fast fill air/water tube stems
Bag of 4 TR414 tubeless tire snap in valve stems 1.5" long for .453" stem hole.
